Видео

Sick video. Thanks!

You're lucky you didn't get the red dot of death on your bezel, it can never be fixed, Chrysler won't diagnose it or fix it or post it because they don't know, and that makes this a POS you should sell ASAP.

Tricks of the trade man as long as it works

120% helpful

It's fun! I've driven no power steering cars and actually kinda prefer it. It feels like you are really connected with the car, way more than with a modern car. And the turning isn't that hard at all, parking is also fine. It's not terrible at all. You can even 'palm on the wheel', at least if you don't have baby arms

A few decades late to the party. But still a cool car.

You can but Bluetooth receiver with usb you dont need to turn on and off your Bluetooth receiver. Recommend if you have usb port like your car

It looks like The Raven Color in old muscle cars.. nice job

Update on how your getting on with the PT GT???

My BMW and Jeep are constant problems. My Cruiser not so much because I can't get the battery to stay charged lol

With that hose thats sitting on top of the motor i think it goes to the top of the radiator the big hose i disconnected it from there it wont make it run hot right like air getting in or anything??

Saved me some stress haha, thanks brah.

Hey bro , I have a ? My check engine light came on. I have a 2004 with 198 ➕️ miles. She was running great and looking 👌 to. I even put a Lil system in her also. So my code is po700@p0888 . Limp mode I need help ,but I don't have a lot of $$$ just trying to fix it by maybe a relay fix . But trying to find the wiring diagram for it. So I can bypass the pcm and timptin fuse box. Wondering if you know which 2 wires are the transmission control and transmission output from the pcm and from timptin fuse box ? Please help me thank you .

Just watched it for help August 13 2024

Remove the axle since gives yiu more room to work.

yep I owned one almost exactly like this one for 25 years and sold it 10 years ago. I should have not sold it. Mine was in a much better state. also 1968. The biggest difference I see quickly is the separation windo. Mine was an electrical going up and down window. This looks like it goes manual side sliding right?

The brown color looks in the opening shots. How is your sisters 1.5 holding up? I have a 1.5 with 108k miles. It’s in need of 4 new rotors and pad sets. Also: when I go to autozone to buy the rotors, they tell me that year make and model could take either 300 mm or 320 mm diameter rotors. I’m unable to measure them before purchasing the correct parts.

Fake, his car isn't making any noise

I’m so glade to finally get a new bulb in, fog light and 2 ballast. But now gotta try to clean the lights 1 more time

I have a 2006 PT cruiser every time the engine light comes on it don't want to ship anybody can help me figured it out..

Where did you get that downpipe? Has it thrown any p0420 codes afterwards?

Use an air hammer around the rotor near the lugs. It will rattle the rotor loose.

that intake is about the worst thing you could do to your car. its not a cold air, its a HOT AIR the way its set up. a modern cars intake is a cold air intake and better than any aftermarket

3:28 The Cat 🐈 is a Mechanic 🧰

I love videos that get right to the point and show the work. This ‘ain’t one of them!

how would i do this with the motor in the car

Do you have a link cause I would love to do this to my 2003 tangerine dream cruiser

We are experiencing the same and i watch your video and 4 assholes laughed at me. Told me it ain't no fuse. Low and. Behold we are still sitting broke down at station watching 3 of these guys trying to get it started

This video is EXACTLY what I was looking for, thank you!!

Hi u the link for the spacer

Hi U have the link for the spacer

Didn’t like the b roll music. Nice video ❤

Have the same problem wish u were close u could help me fix mine

Jimmy bro I mess cadillac DTS 😢 please dawnload video about it 🙏

Can you please pet it

Thanks..My 2001 Turbo needs just what you did. My next project 😊

I got a 2002 PT cruiser Limited that I bought brand-new. I still keep it in showroom condition. Got 119,000 original miles so I figured I might as well clean all the ground wires which wasn’t as bad a job as I thought it would be. I did have the timing belt pulley tensioner and water pump as well as engine mount changed at 90,000 miles. Love your videos keep it going.

This is probably really late but I have an 05 pt cruiser gt convertible and it is also silver. Everyone tells me it’s so cool and cute lol. Just commenting on how you said everyone doesn’t like the way they look. I haven’t gotten a negative opinion so far on how it looks 😂

7mm Allen wrench

Good to see you again

Nice benz man, I watched that awful water pump replacement on your pt gt awhile back, mine is overheating going up hills😭 its the regular 2.0 and the car dealer says its probably the water pump I already replaced thermostat and bled the air out. You think I should I check anything else first because its an 800 dollar job im 17😂😂 any advice would be appreciated It's my first car

Finally someone who doesn’t hate the PT cruiser

I have a 22 year old PT Cruiser with 135,000 mi on it and it's running like brand new. The reason people have issues with these cars is because they don't maintain them. It's the owner's fault, not the car's fault.

I bought mine 5months ago and love it and I I'm new driver and i love it its a great car

Would be Very Helpful if you gave Socket Sizes and Torque Specs as you go. TY

My grandma drove power steering-less, while smoking and drinking a can of PBR...

Where did you get all the money needed to acquire a shop like that? That can't be cheap, right? I ask because I have also wanted to implement a car flipping business model/endeavor. I have the right background for it - Degree In Business Admin and Automotive technology as well as over a decade of real world practice in both = 20 years combined experience between Business/Digital Marketing-Advertising and Automotive repair/paint and body.

Nice film - I've replaced that fucking watts' link twice this year already. Aftermarket replacements last 2 weeks max and noise appears again. What could be the reason/solution? Is it good idea to put a bearing there into the link?

Have a question. Can i swap a 02 transmission pt to a 06 transmission pt.